The A-2000 MK3 is a class AB power amplifier that uses two KT170 beam-tetrode output tubes per channel and produces 120W in pentode mode and 60W in triode mode through push-pull operation. One triple-connected 5654 pentode tube per channel is used in the first-stage to secure a voltage gain of 26dB, and two 6S4 triode tubes per channel are used as the phase inversion and drive tubes for push-pull driving of the KT170 output tubes. The A-2000 MK3 uses two of Allnic’ssignature permalloy core output transformers, one per channel.
-
-
We introduced the M-3000 MK2, a monoblock power amplifier in 2016. Using four KT150 as output tubes, which was a new model at the time, M-3000 MKII produced 200W at 8Ω. Above all, the sound was good. It was fast, powerful, detailed, and quiet. Compared to MK1, which produced 140W with the KT120, the clean sound and a transparent stage stood out.
-
The A10000 are 100 watts of pure Class SET power using the KR242 tube developed for the L5000 DHT driving two enormous Kron 1610 output tubes. A very special set of amplifiers, a personal favourite of Mr. Park.
- All stages are operated by pure DHT tubes
- 100W pure Class A, parallel single ended
- All hard wired
- Sophisticated ratio, mixed nickel Permalloy PB cored output transformers
- Low distortion, high output fixed bias
- Easy bias current adjustment
- Analogue power tube current monitor meter
-
A new paradigm on the original foundation of audio reproduction – the direct heated triode (DHT). The Allnic A-5000DHT monoblock amplifier has only DHT vacuum tubes in the signal path. What does pure DHT mean for a power amplifier? Silent backgrounds; unmatched clarity, detail, speed, decay and harmonic resolution, immersive and layered sound-staging with incredible air around instruments and voices, “you are there” sound-staging, clarity and presence, accurate natural tone and timbre. Wattage means little, the A-5000 DHT produces unbelievable drive from a single 300B. Simply, like all the 5000 series products, the Allnic A-5000DHT will produce as much faithfulness to the source as the rest of your system can provide.
- 10 watts of high power output
- Direct wired, no circuit boards
- Sophisticated ratio, mixed nickel Permalloy PB cored output transformers
- Analogue power tube current monitoring meters
- Exceptionally easy bias controls
- Soft-start Circuitry
-
A-311 M series are all monoblock single-ended power amplifiers. All of them use DHT (direct heated triode) power tubes, such as 300B, PX25, or AD1 as output vacuum tubes, with selection of the output tube type by customer at time of order.
- Pure Class A power stage : 10W(300B), 6W(PX25), 4W(AD1)
- Allnic's DHT technology
- Analogue power tube current monitoring meters
- Exceptionally easy bias controls
- Soft-start Circuitry
-
The M-2500 monoblock power amplifiers are Allnic Audio’s top of the line, power tube flexible, pushpull monoblock power amplifier model. Like all Allnic Audio products, the M-2500s have Permalloy (iron and nickel alloy) for their transformer cores. Allnic is grateful to Mr. G.W. Elmen of Western Electric for inventing Permalloy for transformer core use, and in so doing, providing an enormous service to recorded music listeners everywhere.
- 100 watts of high power output in pentode mode
- More than 30 watts of “SET like” power output in triode mode
- Analogue power tube current monitoring meters
- Exceptionally easy bias controls
- Soft-start Circuitry
-
The Allnic Audio A-2000 25th Anniversary is a 100 watt (pentode) push-pull, stereo power amplifier. Like its integrated amplifier brother, the T-2000, the A-2000 25th Anniversary is pentode/triode switchable “on-the-fly”, providing more than 50 watts in SET sounding triode mode. The A-2000 25th Anniversary offers stable, resolute power in the proverbial velvet glove, along with amazing, revelatory clarity, incredible dynamics and drive, articulate and powerful bass, and standard setting low noise and distortion.
- 100 watts of high power output in pentode mode
- More than 50 watts of “SET like” power output in triode mode
- "On-the-fly" pentode/triode switching
- Analogue power tube current monitoring meters
- Exceptionally easy bias controls
- Soft-start Circuitry
-
The M-5000 TITAN is one of Allnic’s world leading components, with revelatory clarity, incredible dynamics and drive, and standard setting low noise and distortion. Using 8 KT-150 power tubes, the M-5000 TITAN offers massive, stable, resolute power in the proverbial velvet glove. The M-5000 TITAN delivers 400 watts into 8 ohms in pentode mode and 125 watts in pure triode.
- 400 watts (pentode) or 125 watts (triode) of high-power output
- Powerful Driving Circuitry
- Full Engagement” Output Transformers
- Large Nickel/FeSi Core Output Transformers
- Soft-start Circuitry
-
The M-3000 mk2 is one of Allnic’s famous 3000 series, world leading components with revelatory clarity, incredible dynamics and drive, and standard setting low noise and distortion. One of the first amplifiers to use the new KT-150 power tube, the M-3000 mk2 offers massive, stable, resolute power in the proverbial velvet glove. With “on-the-fly” pentode/triode switching, the M-3000 mk2 delivers 200 watts into 8 ohms in pentode mode, and more than 90 watts of “SET like” power output in triode mode. In either mode, the M-3000 mk2s virtues will amaze with power, grace, finesse, lifelike dynamics and amazing micro-detail.
- 200 watts of high power output in pentode mode
- More than 90 watts of “SET like” power output in triode mode
- Analogue power tube current monitoring meters
- Exceptionally easy bias controls
- Soft-start Circuitry
