Loading...

HPA-3000(Discontinued)

The HPA-3000 GT is Allnic Audio’s output transformer coupled, stereo headphone amplifier. The HPA-3000 GT has a voltage gain of +28dB, and a maximum output of three (3) watts. It works best with headphones having an impedance of from 30 to 600 ohms.

Manual

설명

The HPA-3000 GT has the following features:

• Works best with headphones having an impedance of from 30 to 600 ohms

• High-quality, NOS tubes

• Pure Class A operation

• Headphone output: The HPA-3000 GT is equipped with two (2) headphone output ‘jacks’ and two (2) four (4) pin XLR All work for both low and high impedance headphones

• Pre-amp output: The HPA-3000 GT is equipped with one (1) pair of RCA pre-amp outputs, whose impedance is around 10 ohms; this extremely low value provides very powerful driving capability with the widest frequency range to a connected amplifier

• Volume control: The HPA-3000 GT’s volume control is the large knob in the center of front panel. It rotates clockwise (gain increased) and counter-clockwise (gain reduced) – No remote control

• As are all Allnic Audio products, the HPA-3000 GT is fully RoHS (EU Reduction of Hazardous Substances regulation) compliant in construction and materials

Technical Specification
Inputs one (1) pair of unbalanced RCA, one (1) pair of balanced XLR
Outputs tw0 (2) x one-quarter inch, tw0 (2) x four-pin XLR balanced
Frequency Response 20Hz-20kHz (+,-0.3dB)
S/N Ratio -63dB (CCIR, 1kHz)
Output Wattage 3 Watts
Voltage gain +28dB
Optimum Headphone Impedance 50 to 600 ohms
Maximum Input Voltage 10 V RMS
Tubes 6EM7 x 2
Dimensions(WDH) 240mm (9.5 inches) x 330mm (13 inches) x 175mm (6.9 inches)
Weight 10kg (19.9 lbs) net
Pre-out one (1) pair of RCA

If you want to experience Allnic Audio’s products,

please contact your local authorized dealers or

Audio Mentors, which is Allnic Audio’s design & marketing company.

Audio Mentors
Distributors

상품평

아직 상품평이 없습니다.

“HPA-3000(Discontinued)”의 첫 상품평을 남겨주세요

이메일 주소는 공개되지 않습니다. 필수 필드는 *로 표시됩니다