-
-
The HA-5000 is Allnic Audio’s pre-preamplifier, or “Head Amplifier”. It is an active, tube based device for amplification of low voltage signals from moving coil cartridges to allow connection of moving coil cartridges to the moving magnet inputs of a phono-stage, such as the Allnic H-3000 or H-1500. The HA-5000 is an active pre-preamplifier, not a “step-up transformer” like Allnic’s AUT-2000, which uses only a transformer to boost the signal from the cartridge.
- Innovative fixed bias circuit
- Very high S/N ratio
- Extremely wide frequency range
- Ultra flexibility
- Micro-phonic free tube damping know-how
- Variable input load impedances
-
Introducing perhaps world’s finest Direct Heated Triode Phono Stage, the Allnic H-8000 DHT. Built to complement our L-8000 DHT line stage and A-10000 DHT amplifiers, this magnificent 2 piece ultra-high performance multi-input phono stage is sure to “Change the Game”
- Dual MC step-up transformers
- LCR multi-curve equalization
- All transformer coupled, no coupling capcitors
- Zero negative feedback design
- Equipped with the pure vacuum tubes
- High speed, automatic voltage regulation
-
The H-7000V, Allnic’s wildly popular transformer coupled LCR phono stage, is an upgraded version of the H-3000, the phono stage that won the hearts of hundreds of audiophiles worldwide. The H-7000V differs from the H-7000 in that the H-7000V incorporates LCR Multi-curve Equalization. With the H-7000V, you can play any LP issued before RIAA standardization at its correct equalization level!
- Dual MC step-up transformers
- LCR multi-curve equalization
- All transformer coupled, no coupling capcitors
- Zero negative feedback design
- Equipped with the pure vacuum tubes
- High speed, automatic voltage regulation
-
The H-6500 is basically a vacuum tube phono amplifier with 2 sets of MM and 2 sets of MC inputs, RIAA curve correction through an LCR filter, and a separate power supply unit in a separate chassis. MC boosting is done through a built-in permalloy core step-up transformer with 4 winding ratios, and MM amplification is done through 5842 triodes inserted 4 per channel. MM voltage gain is 40dB, MC voltage gain is 62dB, 66dB, 68dB, 72dB.
-
Technology continues to evolve, and Allnic Audio’s KS Park’s “out of this world” works of sonic artistry are no exception. The H-5500 replaces the extremely popular H-1202, providing more features and more beauty in both sound and appearance for a relatively small uptick in cost – especially at this introductory price – adding up to an even greater quality to cost ratio than its predecessor. The H-5500 offers:
- dual MM and MC inputs
- Mu-metal shielding to increase SNR
- power supply capacity double that of the H-1202
- current meter for monitoring tube status
- redesigned larger, heavier, and more solid aluminum chassis
-
Allnic is pleased to announce the release of the H-10000 OTL/OCL, its new flagship phono-stage preamplifier. An OTL/OCL (Output Transformer-Less/Output Capacitor-Less) design omits the coupling transformer at the output stage of the vacuum tube amplifier and the capacitor in the signal path, thus reducing distortion, coloration, and energy loss. It is unprecedented for an OTL/OCL circuit to be used in a phono-stage, which requires a level of amplification much higher than that of a line-stage preamplifier.
- OTL/OCL Flagship phono-stage preamplifier
- Equipped with the pure vacuum tubes
- Silver coil MC step-up transformer
- LCR multi-curve equalization
-
OTL/OCL (Output Transformer-less/Output Capacitor-less) analog output designs to the very best of today’s DAC technology. In common circuits, output capacitors or output transformers are these two coupling devices also introduce their own influences on the transmission of the musical signal, adding their own character (colouration), increasing distortion, and consuming small signals, all as predicted by physical efficiency theory. In addition, they also limit signal dynamics.
- No colouration of the musical signal
- Extremely detailed expression, natural harmonics, and subtle musical decay
- The lowest possible distortion
- The widest musical dynamics
-
Allnic Audio is glad to introduce a new thrilling MC cartridge, Amber, overwhelmingly surpassing the Puritas Ultra. Amber is guaranteed not to displease any LP lovers.
- Cutter head type MC cartridge
- A new rubber damper developed by Allnic
- New CCA (Copper Clad Aluminium) dual coils
- Fritz Gyger S Stylus
- Solid Boron cantilever
-
-
A new paradigm on the original foundation of audio reproduction – the direct heated triode (DHT). The Allnic A-5000DHT monoblock amplifier has only DHT vacuum tubes in the signal path. What does pure DHT mean for a power amplifier? Silent backgrounds; unmatched clarity, detail, speed, decay and harmonic resolution, immersive and layered sound-staging with incredible air around instruments and voices, “you are there” sound-staging, clarity and presence, accurate natural tone and timbre. Wattage means little, the A-5000 DHT produces unbelievable drive from a single 300B. Simply, like all the 5000 series products, the Allnic A-5000DHT will produce as much faithfulness to the source as the rest of your system can provide.
- 10 watts of high power output
- Direct wired, no circuit boards
- Sophisticated ratio, mixed nickel Permalloy PB cored output transformers
- Analogue power tube current monitoring meters
- Exceptionally easy bias controls
- Soft-start Circuitry
-
A-311 M series are all monoblock single-ended power amplifiers. All of them use DHT (direct heated triode) power tubes, such as 300B, PX25, or AD1 as output vacuum tubes, with selection of the output tube type by customer at time of order.
- Pure Class A power stage : 10W(300B), 6W(PX25), 4W(AD1)
- Allnic's DHT technology
- Analogue power tube current monitoring meters
- Exceptionally easy bias controls
- Soft-start Circuitry
-
The A-2000 MK3 is a class AB power amplifier that uses two KT170 beam-tetrode output tubes per channel and produces 120W in pentode mode and 60W in triode mode through push-pull operation. One triple-connected 5654 pentode tube per channel is used in the first-stage to secure a voltage gain of 26dB, and two 6S4 triode tubes per channel are used as the phase inversion and drive tubes for push-pull driving of the KT170 output tubes. The A-2000 MK3 uses two of Allnic’ssignature permalloy core output transformers, one per channel.
-
The Allnic Audio A-2000 25th Anniversary is a 100 watt (pentode) push-pull, stereo power amplifier. Like its integrated amplifier brother, the T-2000, the A-2000 25th Anniversary is pentode/triode switchable “on-the-fly”, providing more than 50 watts in SET sounding triode mode. The A-2000 25th Anniversary offers stable, resolute power in the proverbial velvet glove, along with amazing, revelatory clarity, incredible dynamics and drive, articulate and powerful bass, and standard setting low noise and distortion.
- 100 watts of high power output in pentode mode
- More than 50 watts of “SET like” power output in triode mode
- "On-the-fly" pentode/triode switching
- Analogue power tube current monitoring meters
- Exceptionally easy bias controls
- Soft-start Circuitry
-
The A10000 are 100 watts of pure Class SET power using the KR242 tube developed for the L5000 DHT driving two enormous Kron 1610 output tubes. A very special set of amplifiers, a personal favourite of Mr. Park.
- All stages are operated by pure DHT tubes
- 100W pure Class A, parallel single ended
- All hard wired
- Sophisticated ratio, mixed nickel Permalloy PB cored output transformers
- Low distortion, high output fixed bias
- Easy bias current adjustment
- Analogue power tube current monitor meter
