Loading...
  • The ZL-5000 is 2.5m speaker cables with ZL Technology, specially designed by Allnic Audio. ZL-5000 speaker cables utilize Allnic's patented double-bladed spade termination that ensures no loosening for years.

    • OFC conductors
    • 1000 °C hot melt welding of cable terminations and wire
    • Allnic's patented, maintenance-free double-bladed terminations
    • Optimum thickness of wire
  • The Mu-7R mk2 Intercable uses Mu-metal as a braided shield, which protects the signal from both kinds of noise. Other audio cable manufacturers tend to use copper or silver shields for signal cables. These are effective only for electric noise, not for magnetic interference.

    • Mu-metal braided shield for reducing electromagnetic noise up to max. 98%
    • 1000 °C hot melt welding of cable terminations and wire
    • Optimum thickness of wire
    • MRCT
  • The ZL5000 Power Cable is the Allnic's flagship power cable, equipped with Allnic's patented Zero-Loss Technology.

    • Four surface contacts for IEC receptacles, instead of weak line contact
    • Heavy gauge nickel plated OFC provides superior high current conductivity
    • Double shielding ensures quieter operation
    • 1000 °C hot welding between wire and terminal
  • The HA-5000 is Allnic Audio’s pre-preamplifier, or “Head Amplifier”. It is an active, tube based device for amplification of low voltage signals from moving coil cartridges to allow connection of moving coil cartridges to the moving magnet inputs of a phono-stage, such as the Allnic H-3000 or H-1500. The HA-5000 is an active pre-preamplifier, not a “step-up transformer” like Allnic’s AUT-2000, which uses only a transformer to boost the signal from the cartridge.
    • Innovative fixed bias circuit
    • Very high S/N ratio
    • Extremely wide frequency range
    • Ultra flexibility
    • Micro-phonic free tube damping know-how
    • Variable input load impedances
     
  • The H-7000V, Allnic’s wildly popular transformer coupled LCR phono stage, is an upgraded version of the H-3000, the phono stage that won the hearts of hundreds of audiophiles worldwide. The H-7000V differs from the H-7000 in that the H-7000V incorporates LCR Multi-curve Equalization. With the H-7000V, you can play any LP issued before RIAA standardization at its correct equalization level!
    • Dual MC step-up transformers
    • LCR multi-curve equalization
    • All transformer coupled, no coupling capcitors
    • Zero negative feedback design
    • Equipped with the pure vacuum tubes
    • High speed, automatic voltage regulation
  • The T-1500 mk2 stereo amplifier is Allnic Audio’s top of the line 300B SET stereo integrated amplifier model. Like all Allnic Audio products, the T-1500 mk2 has Permalloy (iron and nickel alloy) for its transformer cores. Allnic is grateful to Mr. G.W. Elmen of Western Electric for inventing Permalloy for transformer core use, and in so doing, providing an enormous service to recorded music listeners everywhere.

    • 10 watts per channel of pure class A high power output
    • Real power drive
    • Nickel alloy output transformer
    • Self-bias control grid
    • Analog power tube current monitoring meters
    • Soft-start Circuitry
  • The Allnic Audio A-2000 25th Anniversary is a 100 watt (pentode) push-pull, stereo power amplifier. Like its integrated amplifier brother, the T-2000, the A-2000 25th Anniversary is pentode/triode switchable “on-the-fly”, providing more than 50 watts in SET sounding triode mode. The A-2000 25th Anniversary offers stable, resolute power in the proverbial velvet glove, along with amazing, revelatory clarity, incredible dynamics and drive, articulate and powerful bass, and standard setting low noise and distortion.

    • 100 watts of high power output in pentode mode
    • More than 50 watts of “SET like” power output in triode mode
    • "On-the-fly" pentode/triode switching
    • Analogue power tube current monitoring meters
    • Exceptionally easy bias controls
    • Soft-start Circuitry
  • The M-5000 TITAN is one of Allnic’s world leading components, with revelatory clarity, incredible dynamics and drive, and standard setting low noise and distortion. Using 8 KT-150 power tubes, the M-5000 TITAN offers massive, stable, resolute power in the proverbial velvet glove. The M-5000 TITAN delivers 400 watts into 8 ohms in pentode mode and 125 watts in pure triode.

    • 400 watts (pentode) or 125 watts (triode) of high-power output
    • Powerful Driving Circuitry
    • Full Engagement” Output Transformers
    • Large Nickel/FeSi Core Output Transformers
    • Soft-start Circuitry
     
    Manual
  • The L-8500 OTL/OCL (Output Transformer-Less/Output Capacitor-Less) is a triple gain stage, remote controlled, line-stage preamplifier, without transformers or capacitors in its single-ended signal path.

    • OTL, OCL Direct Coupled preamplifier
    • Two SEPP 12B4s output
    • True Dual Mono design
    • 41-step Silver Contact Constant Impedance attenuator
  • The L-9000 OTL/OCL (Output Transformer-Less/Output Capacitor-Less) is a triple gain stage, remote controlled, line-stage preamplifier, without transformers or capacitors in its single-ended signal path.

    • OTL, OCL Direct Coupled preamplifier
    • Two SEPP 6080s output
    • True Dual Mono design
    • 61-step Silver Contact Constant Impedance attenuator
  • Beauty, grace, and power. Along with amazing, revelatory clarity, incredible dynamics and drive, articulate and powerful bass, and standard setting low noise and distortion, the T-2000 25th Anniversary provides 100 watts per channel of push-pull, pentode power or more than 50 watts SET sounding watts in triode mode; AND pentode/triode switching is “on the fly”. The T-2000 25th Anniversary offers finesse, delicacy and detail with stable, resolute power in the proverbial velvet glove.

    • 100 watts of high power output in pentode mode
    • More than 50 watts of “SET like” power output in triode mode
    • On-the-fly pentode/triode switching
    • In-house manufactured, 41 stepped, silver contact attenuator
    • Analog power tube current monitoring meters
    • Soft-start Circuitry
     
  • The M-3000 mk2 is one of Allnic’s famous 3000 series, world leading components with revelatory clarity, incredible dynamics and drive, and standard setting low noise and distortion. One of the first amplifiers to use the new KT-150 power tube, the M-3000 mk2 offers massive, stable, resolute power in the proverbial velvet glove. With “on-the-fly” pentode/triode switching, the M-3000 mk2 delivers 200 watts into 8 ohms in pentode mode, and more than 90 watts of “SET like” power output in triode mode. In either mode, the M-3000 mk2s virtues will amaze with power, grace, finesse, lifelike dynamics and amazing micro-detail.

    • 200 watts of high power output in pentode mode
    • More than 90 watts of “SET like” power output in triode mode
    • Analogue power tube current monitoring meters
    • Exceptionally easy bias controls
    • Soft-start Circuitry
  • Allnic Audio is glad to introduce a new thrilling MC cartridge, Amber, overwhelmingly surpassing the Puritas Ultra. Amber is guaranteed  not to displease any LP lovers.
    • Cutter head type MC cartridge
    • A new rubber damper developed by Allnic
    • New CCA (Copper Clad Aluminium) dual coils
    • Fritz Gyger S Stylus
    • Solid Boron cantilever
  • The ZL-8000S is Allnic's first speaker cable which uses silver conductors with existing OFC Conductors. Allnic speaker cables utilize a patented double-bladed spade termination that ensures no loosening for years.

    • Silver with OFC conductors
    • Zero Loss Technology
    • 1000 °C hot melt welding of cable terminations and wire
    • Patented double-bladed spade speaker terminations
    • Optimum thickness of wire
  • The L-10000 OTL/OCL (Output Transformer-Less/Output Capacitor-Less) is a triple gain stage, remote controlled, line-stage preamplifier, without transformers or capacitors in its single-ended signal path.

    • OTL, OCL Direct Coupled preamplifier
    • Two SEPP 300Bs output
    • True Dual Mono design
    • 61-step Silver Contact Constant Impedance attenuator